We are renowned manufacturers and exporters of low cost PID controller that has gained wide appreciation for international quality standards. This modular design controller is highly accurate & reliable and finds wide application in various industries. We even custom design these controllers as per the client specific requirement.

 

Features:

 

• Advanced PID + Fuzzy logic

• Universal input

• Modular design

• Universal modular output

• Auto tuning

• Highly accurate & reliable

• Programmable, profile controller

• All size, free power supply

 

We are engaged in offering thyristor power controller (SCR) that provides variable AC power control to resistive loads. Rugged and light in weight, these controllers produce no arcing, noise or vibrations even at full power. Optically isolated, the soft start extends heaters life and eliminates thermal shock. The all solid-state design in both control circuitry ensures long-term reliability, even in demanding conditions.

Features:

• These thyristor power controllers provide variable AC power control to resistive loads only

• Soft start extends heaters life- eliminates thermal shock

• Optically isolated

• These Thyristor power controllers can accept 4-20 mA or 0-10 VDC

• Self synchronizing to line frequency

Description:

• Load Capacity: 25 A, 35A, 40 A, 50 A, 70 A, 90A, 150A, 200A, 350A

• Output Voltage: 0-97 % output

• Application Load: Resistive

• Power Supply: 110 V, 220 VAC, 380 VAC, 440 VAC

• Input Signal: 4-20 mA DC, 0-10 VDC, VR adjustment by manual

Our range finds wide application in:

• Heat treatment furnaces

• Packing machines

• Food machinery

• Drying

• Plastic injection molding

• Wire and cable

• Plastic extrusion machinery

• Powder metallurgy

• High temperature ceramic furnace

• UV, IR drying

We are one of the leading manufacturers and exporters of hot runner temperature controller. Our G series hot runner Modules represents the state-of-the-art in hot runner temperature control technology. Designed to operate independently, the system has microprocessor-based auto tuning temperature controlling and self-regulating power controllers. The controller has alarm for heater failure, under and over temperature.

 

Features:

 

• Gradual phase angle firing soft start

• Power control system

• Built in diagnostics

• Self-regulating power controllers

• Accuracy of +/- IOC

• PID accepts J, K Thermocouples

• Phase angle power controllers are used which saves heater life and power, as these are variable automatic power controllers

• Build in soft start in power controllers

• Fast fuses for over current protection

• Power controllers can handle more than 5000 watts in single 2one at 220 Vac.

• Alarm for heater failure

• Alarm for under and over temperature

• In case of thermocouple failure, one can set percentage of power to the heaters

 

Main Frame, Panel

 

We offer a wide selection of zone capacities to suit almost any control application. We provide individual frame sections up to 12 Zones. Then up to 48 Zones, these are stacked together. These are pre-wired integral units.

 

We are counted among the leading manufacturers, traders and exporters of PID temperature/process controllers in the global market. Our products are combined with reliability and high speed functionality. They are available in different formats as 1/16 DIN, 1/ 4 DIN and 1/8 DIN. PID Temperature has an wide application in maintaining optimum temperature in dryers, climatic chambers, packaging machinery, Semiconductor packaging /testing and panting and coating. This range includes additional feature of motor position control, Set point programming Dual displays and Bar graph, phase angle power control and Programmer functionality.

 

Easy to configure

 

 

• A 4-digit security code prevents be hidden to the user to prevent unauthorized changes
• Two different configuration levels provide easy access to parameters.
• Parameters can be hidden to the user to prevent misconfiguration of the unit.

 

 

Various Control algorithms

 

 

• Heat/Cool Algorithm
• Motor Position control.
• Single phase or 3 phase control
• . PID or ON/OFF control.

 

 

Extended Alarm capability

 

 

• Different alarm modes available
• Up to 3 different alarm outputs per instrument

 

Universal Power supply

 

 

• Operates on any line voltage from 85Vac to 265Vac at 50/60Hz.

 

Communication

RS232 or RS485 communication.

 

 

Remote Set point capability

 

Manual/Automatic modes

 

Autotuning capability

 

Condensed Specifications

 

Product Dimensions

 

Industrial Measurement and Control

Input :  TC (K, J, R, S, B, E, N, T, W, PL II, U, L)

RTD (Pt100, JPt100, JPt50)

Linear (4~20mA)

Input Sampling Time 500 ms

Input Resolution 14 bit (each)

PV/SP Indication 4-digit, 7 segment display

Configuration Memory Non-volatile memory (E2PROM)

Indication Accuracy 0.5%FS

Proportional Band ( P ) 0~200% (On/Off action at P=0)

Integral Time ( I ) 0~3600 sec (PD action at I=0)

Derivative Time ( D ) 0~900 sec (PI action at D=0)

Cycle Time 0~150 sec (4~20mA 0, SSR 1, Relay 10)

Dead Band Time 0~1000 sec (dead time compensation)

Relay Output Contact, SPDT, 3A/240VAC

 

Voltage Output Voltage Pulse, 20VDC/20mA

Linear Output 4~20mA, 0~5V, 0~10V, 1~5V

Motor Control Position Output Servo motor valve control (open loop circuit)

Outputs 3 Outputs (optional)

Type 17 alarm modes available

Timer Switching alarm, continuous or on delay timer alarm

Output Signal SP, PV, MV

Type of Output 4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V

Type of Input 4~20mA, 0~20mA, 0~5V, 0~10V, 1~5V, 2~10V

Sampling Time 500 ms

Communication Type of Communication RS-232, RS-485 ASCII Protocol

Rated Power Supply Voltage & Frequency AC 85 ~ 265V, 50/60Hz

Power Consumption 8VA

Ambient Temperature -25°C ~ 65°C (-13°F ~ 149°F)

Ambient Humidity 50 ~ 85% RH (none condensing)

Front Face 48 x 48 x 94mm (1.89 x 1.89 x 3.7 in.) Front Face 48 x 96 X 94mm (1.89 x 3.78 x 3.7 in.)  Panel Cutout 45.5 x 45.5mm (1.79 x 1.79 in.) Panel Cutout 45.5 x 91mm (1.79 x 3.58 in.)

Front Face 96 x 96 x 94 mm (3.78 x 3.78 x 3.7 in.) Panel Cutout 90 x 90mm (3.54 x 3.54 in.)

 

 

We are a prominent manufacturer and trader of temperature control panel and thyristor control panel.
 
Temperature control panel:

Designed for effective temperature control of resistive heating loads, these panels are built in accordance with the national electric code and also have digital temperature and SCR power controls. The panel provides a complete control, specifically accurate and safe control of temperature. The user-friendly design of the panel allows user to easily adjust controlling parameters as desired. The temperature is displayed on a bright LED display.

Thyristor control panel:

Thyristor control panels offered by us are designed with accuracy & ensure effective performance. It ensures optimum comfort and maximum economy for the user.
 
Features

• Epoxy painted steel enclosure
  
• Door interlocked isolator
  
• Panel front with PID controller
  
• Panel front has on / off switch & indicators
  
• Built-in fans for cooling
  

We hold expertise in manufacturing and exporting bulk range of temperature controllers in the market. With the assistance of multi disciplinary technological skills and precision quality raw material temperature controllers are manufactured in large scale. Our products are cost effective and can be customized according to the requirement. They functions to regulate fluctuating temperature and concisely measures it efficiently.

 

Counters
 

Display	4 and 6 digits
Direction Modes or Auto Reset	On delay or Interval
Outputs	2 c/o

 

Digital Timers & Counters

 

Model	On delay, INT delay
Time Range	Seconds Minute House up to 9999 hrs
Supply	110/220 VAC

 

Features:

 

• Robust structure
• Noiseless
• Easy to install

We manufacture and export a competitive range of power controllers, which are available in solid-state design to both types of control circuitry. We manufacture these products as per the international quality standards and these products are widely known for their high functionality. These products are basically used for controlling the power as well as available in varied specifications in terms of sizes, lengths as well as dimensions.

 

Features:     

 

• No vibration
• Light in weight
• Robust construction