Send Email
Send SMS
Search
Dydac Controls
Dydac Controls


Hot Runner Temperature Controller Systems

  • Microprocessor Based Auto –Tune PID Temperature Controllers
  • Accepts J & K Type Thermocouple
  • Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of +/- 1 Deg. C
  • Internal Solid state triac/ SCR, triggered by Phase angle Firing
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuse
  • New Series with Short Circuit protection of Power Modules by B Curve MCB
  • Latest PID algorithm
  • Power Controller can take 3600 or 5000 Watts at 240 VAC
  • In case of thermocouple Failure you can set the PowerManually by not stopping the production
  • Auto -Tune PID Controller
  • Heaters life is extended to 10 times
  • PID Temperature controller has graph indication of percentage output going to the heaters
  • PID Temperature Controller is CE Compliant and Phase Angle Power CE Compliant
  • The Power Controllers are Phase Angle Fired and are Variable Power Controller whichgives as much Power to the Heaters as required to maintain the temperature thus savingthe Energy (Energy Conservation at Set Point) & increasing life of the heaters and less Production Break Down

Hot Runner Temperature Controllers

REQUEST CALLBACK

Hot Runner Temperature Controllers
Approx. Rs 1.92 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
ZONES1- 48 Zones
TypeDigital
BrandDydac, Axis , Athena

We are one of the leading manufacturers and exporters of Hot Runner Temperature Controllers. Our Dydac or Axis series hot runner Modules represents the state-of-the-art in hot runner temperature control technology. Designed to operate independently, the system has microprocessor-based auto tuning temperature controlling and self-regulating power controllers. The controller has alarm for heater failure, under and over temperature.

Features:

  • Gradual phase angle firing soft start
  • Power control system
  • Built in diagnostics
  • Self-regulating power controllers
  • Accuracy of /- IOC
  • PID accepts J, K Thermocouples
  • Phase angle power controllers are used which saves heater life and power, as these are variable automatic power controllers
  • Build in soft start in power controllers
  • Fast fuses for over current protection
  • Power controllers can handle more than 5000 watts in single 2one at 220 Vac.
  • Alarm for heater failure
  • Alarm for under and over temperature
  • In case of thermocouple failure, one can set percentage of power to the heaters

Main Frame Panel:

  • We offer a wide selection of zone capacities to suit almost any control application.
  • We provide individual frame sections up to 12 Zones.
  • Then up to 48 Zones, these are stacked together.
  • These are pre-wired integral units.
Yes! I am interested

Hot Runner Controllers

REQUEST CALLBACK

Hot Runner Controllers
Approx. Rs 1.28 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Input J or K type thermocouple programmable
Input Value0-400 Deg. C
TypeAutomatic
UsageTemperature Control For Hot Runner Injection Molds and Hot Blocks
Digit Display SizeDual Display

Dydac offers Hot Runner Controllers uses high-intellect microprocessor technology to provide reliable, precise temperature control, these state-of-the-art controllers are our most user-friendly control modules yet. Consistent temperature control can improve part quality and reduce scrap. Hot Runner Controllers provide dependable temperature control for runnerless/sprueless injection molds, machine nozzles, hot sprue bushings, or any other application requiring thermocouples to monitor temperature. Dydac hot runner controllers provide all the advantages of a fully integrated controller in a compact package at an affordable price. This new control platform offers Single to 48 zones of control and is equipped with 16 amps and 30 per zone, making it flexible enough to handle a wide variety of applications. The Dydac HRTC has a user-friendly, with a long list of features not generally found in this category of controller. Accurate control is achieved through the application of Active Reasoning Technology. Dydac uses a combination of software and hardware architecture, which is unique to the product line. It is recognized throughout the industry for its accuracy, consistency and repeatability.

Specifications:
  • Microprocessor Based Auto –Tune PID Temperature Controller
  • Accepts J ,K ,R, S, T Type Thermocouple
  • ( Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of /- 1 Deg. C.
  • Internal Solid state triac, triggered by Phase angle Firing.
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuses.
  • New Series with Short Circuit protection of Power Modules by C Curve MCB
  • Latest Generation PID algorithm.
  • Power Controller can take 3600 or 7200 Watts at 240 VAC
  • In case of thermocouple Failure you can set the Power Manually by not stopping the production.
  • Heaters life is extended to 10 times.
  • PID Temperature controller has bar graph indication of percentage output going to heaters.
  • PID Temperature Controller is CE Compliant and Phase Angle Power Controller is CE Compliant.
  • The Power Controllers are Phase Angle Fired and are Variable Power Controllers which gives as much Power to the Heaters as required to maintain the Temperature thus saving the Energy ( Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down.

Selection of Heater Current Load

16 Amps

 

32 Amps

Mold Power and Thermocouple Cables

More specifically designed for the plastic industry by process of hot runner injection molding, Dydac manufactures mold power and mold thermocouple cables designed specifically for your mold and temperature controller connections.

Working hand-in-hand with processors as well as mold makers, Dydac can provide virtually any configuration or adaptor cable that is best suited for your individual process. Dydac can assist with cable design, cable and connector selections. With our just-in-time manufacturing capabilities, Dydac can produce cables on demand.

Yes! I am interested

Axis Hot Runner Temperature Controllers

REQUEST CALLBACK

Axis Hot Runner Temperature Controllers
Approx. Rs 16,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
TypeDigital
PowerMax 15 amps at 20 Deg C
Temperature Range0-400 Deg. C
BrandAxis

Control Card Technical Specifications 

Performance Specifications
  • Auto Control Mode: Computer-Calcu Cycle System
  • Control Accuracy: -0.1 F ( -0.1 c) dependent on the total thermal system
  • Temperature Range: 32 to 999F (0 to 537c)
  • Temperature Stability: -0.5% of full scale over the ambient range of 32 to 131F (0 to 55c)
  • Calibration Accuracy: Better than 0.2% of full scale
  • Power Response Time: Better than 0.3 second
  • Process Sampling: 100 milliseconds Jumper-selectable
  • Adj Comp Step Control Mode: Variable stepping voltage, phase fired
  • Adj Comp Step System Duration: Approximately 5 minutes
  • Adj Comp Step Output Voltage: Steps approximately from 25v RMS with 240Vac line output phase-fired
  • Adj Comp Step Override Temp.: 221F (105c)
  • Compensated: Adjustable from 0-100% Maintain output Power to with 1% of setting
  • Operational Mode Priority:a. TC open, TC reverse, TC shorted Shutdown and Open heater override Adj Comp step System
  • b. Manual mode override TC open, TC reverse
  • Safe Change Function: Use of the Safe Change feature does not eliminate the need for careful
  • installation and removal of controller.

Input Specifications

  • Thermocouple (T/C) sensor: Type "J" grounded or ungrounded, Type "k" (Jumper-selectable)
  • External T/C Resistance: Maximum 100 ohms for rated accuracy isolated from ground and supply voltages
    T/C Isolation: isolated from ground and supply voltages
  • Cold Junction Compensation: Automatic, better than 0.02F/F (0.01c / c) Potentiometric
    Input Protection: Diode clamp, RC
    Input Protection: filter 10 Megohms
  • Input Amplifier Stability: Better than 0.05F/F(0.03 c / c)
  • Input Dynamic Range:Greater than 999F (0 to 537c)
  • Common Mode Rejection Ratio:Greater than 100dB
  • Power Supply Rejection Ratio: Greater than 70dB

Output Specifications 

  • Voltages: 110 Vac or 240 Vac nominal, single phase
  • Power Capability: 15 amperes, 3600 watts 240 Vac
  • Overload Protection: 15 amperes, 1800 watts 120 Vac Triac and load use high speed fuses,
  • Power Line Isolation: Both side are Fused(ABC-15 GBB)Optically and transformer isolation from ac line. Isolation voltage is greater than 2500 volts
  • Output Drive: Internal solid state triac, triggered by ac zero crossing pulses

Controls And Indicators

  • Set point Control:Two buttons up or down Resolution:1F (1c)
  • % Power Control: Two buttons up and down
  • Mode Control: Push button switch with LED indicator for manual mode
  • Display: TOP: 3-digit filtered LED BOTTOM: 4-digit filtered LED
  • Status Indicators: Heater output, Soft-Start, Manual, alarm
  • Power On-Off: Rocker Switch

Electrical Power Specifications

  • Input Voltage: 110 ~ 240 Vac,-10%
  • Voltage Frequency: 50-60 HZ
  • DC Power Supplies: Internally generated, regulated and temperature compensated
  • Dimensions: load 2" W * 7" H * 71/2" D(5.08cm * 17.78cm * 19.05cm)
Yes! I am interested

View PDF

Hot Runner Connectors and Cables

REQUEST CALLBACK

Hot Runner Connectors and Cables
Approx. Rs 7,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Power/Voltage16 Amps and 30 Amps at 230 VAC
Length4 Meters other lengths optional

We offer Connectors and Cables. Mold Power and Thermocouple Cables more specifically designed for the plastic industry by process of hot runner injection molding, Dydac manufactures mold power and mold thermocouple cables designed specifically for your mold and temperature controller connections. Working hand-in-hand with processors as well as mold makers, Dydac can provide virtually any configuration or adaptor cable that is best suited for your individual process. Dydac can assist with cable design, cable and connector selections. With our just-in-time manufacturing capabilities, Dydac can produce cables on demand. Mold power cables are used to connect the mainframe to the power input connector located on the mold. All cables are wired for 5, 8, or 12 (rated @ 15A) zones as well as units working on 30A. Mold power cables are available in any length, 10 and 20 feet are standard stocked cables.

No. of Zones 10 Feet Cable 20 Feet Cable:


  • 5 PC5Z-10 PC5Z-20
  • 8 PC8Z-10 PC8Z-20
  • 12 PC12Z-10 PC12Z-20

Mold Thermocouple Cables:

  • Mold thermocouple cables are used to connect the mainframe to the thermocouple connector on the mold. Cables are wired for 5, 8, or 12.
  • In most cases the connections on the controller remain constant, while the connector on the mold end can vary.
  • Mold thermocouple cables are available in any length, 10 and 20 feet are standard stocked cables

No. of Zones 10 Feet Cable20 Feet Cable:

  • 5 TC5Z- tC5Z-20
  • 8 TC8Z- 10 tC8Z-20
  • 12 TPC12Z-10 tC12Z-20
Yes! I am interested

Athena Hot Runner Temperature Controllers

REQUEST CALLBACK

Athena Hot Runner Temperature Controllers
Approx. Rs 3.84 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
TypeDigital
Model NumberAthena

The Athena Hot Runner Temperature Controllers Series RMA is a microprocessor-based, single-zone temperature controller specifically designed for runnerless molding applications. It features an easy-to-use operator keypad, two LED displays, and discrete indicators for heat output, alarm, degree F/C indication, manual, and closed loop mode.

Features:


  • Compatible with industry standards control modules and mainframes
  • Accepts Type J thermocouple
  • Bumpless auto/manual transfer
  • CompuStep® bake out feature prevents moisture at startup
  • Built-in loop break for open heater, shorted triac, reversed or shorted thermocouple
  • Open thermocouple break protection with jumper selectable shutdown or average power output based on operation
  • Preset alarms at 30°F (17°C)
  • SafeChange™ “hot swap” feature allows safe removal and replacement of module
  • CE compliant
Yes! I am interested

Dydac Hot Runner Temperature Controllers

REQUEST CALLBACK

Dydac Hot Runner Temperature Controllers
Approx. Rs 1.92 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
TypeDigital
Power15 Amps and 30 Amps at 230 VAC
Temperature Range0-400 Deg C ( Input Programmable )
BrandDydac

More specifically designed for the plastic industry and Pet preform Industry by process of hot runner injection molding.Dydac uses high-intellect microprocessor technology to provide reliable, precise temperature control, these state-of-the-art controllers are our most user-friendly control modules yet. Consistent temperature control can improve part quality and reduce scrap. Hot Runner Controllers provide dependable temperature control for runnerless/sprueless injection molds, machine nozzles, hot sprue bushings, or any other application requiring thermocouples to monitor temperature.

Dydac hot runner controllers provide all the advantages of a fully integrated controller in a compact package at an affordable price. This new control platform offers Single to 48 zones of control and is equipped with 16 amps and 30 per zone, making it flexible enough to handle a wide variety of applications. The Dydac HRTC has a user-friendly, with a long list of features not generally found in this category of controller. Accurate control is achieved through the application of Active Reasoning Technology. Dydac uses a combination of software and hardware architecture, which is unique to the product line. It is recognized throughout the industry for its accuracy, consistency and repeatability.

  • Microprocessor Based Auto –Tune PID Temperature Controller
  • Accepts J ,K ,R, S, T Type Thermocouple
  • ( Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of /- 1 Deg. C.
  • Internal Solid state triac, triggered by Phase angle Firing.
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuses.
  • New Series with Short Circuit protection of Power Modules by C Curve MCB
  • Latest Generation PID algorithm.
  • Power Controller can take 3600 or 7200 Watts at 240 VAC
  • In case of thermocouple Failure you can set the Power Manually by not stopping the production.
  • Heaters life is extended to 10 times.
  • PID Temperature controller has bar graph indication of percentage output going to heaters.
  • PID Temperature Controller is CE Compliant and Phase Angle Power Controller is CE Compliant.
  • The Power Controllers are Phase Angle Fired and are Variable Power Controllers which gives as much Power to the Heaters as required to maintain the Temperature thus saving the Energy ( Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down.

Selection of Heater Current Load

16 Amps

 

32 Amps

Mold Power and Thermocouple Cables

More specifically designed for the plastic industry by process of hot runner injection molding, Dydac manufactures mold power and mold thermocouple cables designed specifically for your mold and temperature controller connections.

Working hand-in-hand with processors as well as mold makers, Dydac can provide virtually any configuration or adaptor cable that is best suited for your individual process. Dydac can assist with cable design, cable and connector selections. With our just-in-time manufacturing capabilities, Dydac can produce cables on demand.



Additional Information:

  • Item Code: HRTC
Yes! I am interested

View PDF

Dydac Mould Temperature Controllers for Pet Preform Moulds

REQUEST CALLBACK

Dydac Mould Temperature Controllers for Pet Preform Moulds
Approx. Rs 2.4 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
ZONES1-48 Zones
BrandDydac
ApplicationPet Preform Molds

Features
  • Microprocessor Based Auto – Tune PID Temperature Controllers
  • Accepts J & K Type Thermocouple
  • Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of +/- 1 Deg. C
  • Internal Solid state triac/ SCR, triggered by Phase angle Firing
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuse
  • New Series with Short Circuit protection of Power Modules by B Curve MCB
  • Latest PID algorithm
  • Power Controller can take 3600 or 5000 Watts at 240 VAC
  • In case of thermocouple Failure you can set the Power Manually by not stopping the production
  • Auto -Tune PID Controller
  • Heaters life is extended to 10 times
  • PID Temperature controller has graph indication of percentage output going to the heaters
  • PID Temperature Controller is CE Compliant and Phase Angle Power CE Compliant
  • The Power Controllers are Phase Angle Fired and are Variable Power Controller which gives as much Power to the Heaters as required to maintain the temperature thus saving the Energy (Energy Conservation at Set Point) & increasing life of the heaters and less Production Break Down

Selection of Heater Current Load

16 Amps

32 Amps

Yes! I am interested

Pet Preform Mould Temperature Controller

REQUEST CALLBACK

Pet Preform Mould Temperature Controller
Approx. Rs 96,000 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandDYDAC

Features
  • Microprocessor Based Auto – Tune PID Temperature Controllers
  • Accepts J & K Type Thermocouple
  • Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of +/- 1 Deg. C
  • Internal Solid state triac/ SCR, triggered by Phase angle Firing
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuse
  • New Series with Short Circuit protection of Power Modules by B Curve MCB
  • Latest PID algorithm
  • Power Controller can take 3600 or 5000 Watts at 240 VAC
  • In case of thermocouple Failure you can set the Power Manually by not stopping the production
  • Auto -Tune PID Controller
  • Heaters life is extended to 10 times
  • PID Temperature controller has graph indication of percentage output going to the heaters
  • PID Temperature Controller is CE Compliant and Phase Angle Power CE Compliant
  • The Power Controllers are Phase Angle Fired and are Variable Power Controller which gives as much Power to the Heaters as required to maintain the temperature thus saving the Energy (Energy Conservation at Set Point) & increasing life of the heaters and less Production Break Down

Selection of Heater Current Load

16 Amps

32 Amps

Yes! I am interested

View PDF

Dydac Hot Runner Controller

REQUEST CALLBACK

Dydac Hot Runner Controller
Approx. Rs 1.92 Lakh / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
No Of Zones 1- 48 Zones
Input Value0-400 Dec C ( Input Programmable )
TypeAutomatic
Digit Display SizeDual Display

More specifically designed for the plastic industry and Pet preform Industry by process of hot runner injection molding.Dydac uses high-intellect microprocessor technology to provide reliable, precise temperature control, these state-of-the-art controllers are our most user-friendly control modules yet. Consistent temperature control can improve part quality and reduce scrap. Hot Runner Controllers provide dependable temperature control for runnerless/sprueless injection molds, machine nozzles, hot sprue bushings, or any other application requiring thermocouples to monitor temperature.

Dydac hot runner controllers provide all the advantages of a fully integrated controller in a compact package at an affordable price. This new control platform offers Single to 48 zones of control and is equipped with 16 amps and 30 per zone, making it flexible enough to handle a wide variety of applications. The Dydac HRTC has a user-friendly, with a long list of features not generally found in this category of controller. Accurate control is achieved through the application of Active Reasoning Technology. Dydac uses a combination of software and hardware architecture, which is unique to the product line. It is recognized throughout the industry for its accuracy, consistency and repeatability.

  • Microprocessor Based Auto –Tune PID Temperature Controller
  • Accepts J ,K ,R, S, T Type Thermocouple
  • ( Soft Start) bake out feature prevents moisture at startup
  • Auto/Manual Transfer
  • Accuracy of /- 1 Deg. C.
  • Internal Solid state triac, triggered by Phase angle Firing.
  • Dual displays for Process and Set Temperatures
  • High Speed Fuses 16 A protection Fuses.
  • New Series with Short Circuit protection of Power Modules by C Curve MCB
  • Latest Generation PID algorithm.
  • Power Controller can take 3600 or 7200 Watts at 240 VAC
  • In case of thermocouple Failure you can set the Power Manually by not stopping the production.
  • Heaters life is extended to 10 times.
  • PID Temperature controller has bar graph indication of percentage output going to heaters.
  • PID Temperature Controller is CE Compliant and Phase Angle Power Controller is CE Compliant.
  • The Power Controllers are Phase Angle Fired and are Variable Power Controllers which gives as much Power to the Heaters as required to maintain the Temperature thus saving the Energy ( Energy Conservation at Set Point) and increasing the life of Heaters and Less Production Break Down.

Selection of Heater Current Load

16 Amps

 

32 Amps

Mold Power and Thermocouple Cables

More specifically designed for the plastic industry by process of hot runner injection molding, Dydac manufactures mold power and mold thermocouple cables designed specifically for your mold and temperature controller connections.

Working hand-in-hand with processors as well as mold makers, Dydac can provide virtually any configuration or adaptor cable that is best suited for your individual process. Dydac can assist with cable design, cable and connector selections. With our just-in-time manufacturing capabilities, Dydac can produce cables on demand.

Yes! I am interested

View PDF
 
X


Call Us:  +91-8079452864
Dydac Controls
Sushil Zarabi (CEO)
No. B-1/6A, Mayur Vihar, Phase-III ,
New Delhi - 110096, Delhi, India
Contact via E-mail
Contact via SMS



Home  |   About Us   |  What We Offer  |  Site Map  |   Contact Us   |   Mobile Site

© Dydac Controls. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Dydac Controls