Send Email
Send SMS
Search
Dydac Controls
Dydac Controls


Melt Pressure Controllers

Melt Pressure Controllers:

  • Display pressure
  • Bar graph display for quick-glance scaled value
  • Two alarm relay output,
  • Analogre-transmissionof process variable allows signal to be sent to other devices

Ideal For:

  • Synthetic Fibres
  • Photographic film
  • Plastics- Solid extrusion
  • Wire coating
  • Multi-layer extrusion

Extrusion Melt Pressure Controllers:

  • Melt pressure control
  • Suitable for 4 or6 wire transducers
  • Pre-screen pressure monitor andalarm
  • Pressure alarms
  • Simple calibration

The Controllers are fully programmable melt pressure controller, suitable for precision pressure control in theplasticextrusion industries.In its basic format the Controller standard hardware includes an input for melt pressure measurement, an analog output to drive the extruder screw and alarms to detect high and low pressure conditions. Additionally, a second pressure input can be connected providing the facilityto puta differential pressure alarm across the screen. Automatic transducer calibration procedures and 5Vdc or 10Vdc transducer power supplies are provided for both inputs.


Melt Pressure Controller

REQUEST CALLBACK

Melt Pressure Controller
Approx. Rs 37,800 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Input 2.0 mV/V, 3.33 mV/V, 4-20 mA, 0-10 VDC fixed from factory
Output4-20 mA DC or 0-10 VDC
TypeAutomatic, Manual
UsageExtrusion
Digit Display SizeDual Display

Ideal for:

  • Synthetic Fibers
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion
  • Extrusion Melt Pressure Controllers
  • Melt pressure control
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration
  • Field bus communication options

 

The Controllers are fully programmable melt pressure controller, suitable for precision pressure control in the plastic extrusion industries.

In its basic format the Controller  standard hardware includes an input for melt pressure measurement, an analog output to drive the extruder screw and alarms to detect high and low pressure conditions.  Additionally, a second pressure input can be connected providing the facility to put a differential pressure alarm across the screen.  Automatic transducer calibration procedures and 5Vdc or 10Vdc transducer power supplies are provided for both inputs 

Specifications: 

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.0 mv/V or 3.3 mV/V 

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(7)

Output Types

4-20 mA, 0-10 VDC, 0-5 VDC, 1-5 VDC

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

(11)

Communication

RS-485 MODBUS( PY602 Only)

(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(15)

 Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

 96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

: 92mm x 92mm (W x H)

(19)

 Weight

400(Maximum) grams / 600 grams max.

Yes! I am interested

Sand PS 9016 Series Melt Pressure Controllers

REQUEST CALLBACK

Sand PS 9016 Series Melt Pressure Controllers
Approx. Rs 37,800 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
Input Value2.0 mV/V
TypeAutomatic, Manual
UsageExtrusion Process
Digit Display SizeDual Display

Ideal For

  • Synthetic Fibers
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion 

 Extrusion Melt Pressure Controllers  

  • Extrusion Melt Pressure Controllers
  • Melt pressure control
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

The Controllers are fully programmable melt pressure controller, suitable for precision pressure control in the plastic extrusion industries.

In its basic format the Controller  standard hardware includes an input for melt pressure measurement, an analog output to drive the extruder screw and alarms to detect high and low pressure conditions.  Additionally, a second pressure input can be connected providing the facility to put a differential pressure alarm across the screen.  Automatic transducer calibration procedures and 5Vdc or 10Vdc transducer power supplies are provided for both inputs 

Specifications  

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.0mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(7)

Output Types

4-20 mA, 0-10 VDC, 0-5 VDC, 1-5 VDC

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

 



(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(15)

 Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

 96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

 92mm x 92mm (W x H)

(19)

 Weight

400(Maximum) grams / 600 grams max.

Yes! I am interested

Melt Pressure Indicator

REQUEST CALLBACK

Melt Pressure Indicator
Approx. Rs 33,400 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandSand
ModelPS1016
Display TypeDigital

Melt Pressure Indicator

  • Display pressure, temperature
  • Optional second input/output for cost-effective single instrument
  • View display information locally or remotely by optional Modbus RTU
  • Two alarm relay output, third alarm optional
  • Digital security code prevents unauthorized use
  • IP65/NEMA 4X rated for harsh environments        
Ideal For:
  • Synthetic Fibres
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion
  • Extrusion Melt Pressure Display
  • Melt pressure Display
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

Specifications

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.5mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(8)

Temperature Input

Thermocouple “E”, “J”, “K”

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

(11)

Communication

RS-485 MODBUS( PY602 Only)

(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(14)

Humidity

<= 80% RH

(15)

 Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

 96mm×48mm×100 mm (W x H x D)
 96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

:92mmx46mm(WxH) 
: 92mm x 92mm (W x H)

(19)

 Weight

400(Maximum) grams / 600 grams max.

Yes! I am interested

Sand Melt Pressure Display Indicators

REQUEST CALLBACK

Sand Melt Pressure Display Indicators
Approx. Rs 33,400 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandSand
ModelPS1016
Display TypeDigital

Melt Pressure Display

  • Display pressure, temperature
  • Optional second input/output for cost-effective single instrument
  • View display information locally or remotely by optional Modbus RTU
  • Two alarm relay output, third alarm optional
  • Digital security code prevents unauthorized use
  • IP65/NEMA 4X rated for harsh environments 
Ideal For:
  • Synthetic Fibres
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion
  • Extrusion Melt Pressure Display
  • Melt pressure Display
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

Specifications

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.5mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(8)

Temperature Input

Thermocouple “E”, “J”, “K”

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

(11)

Communication

RS-485 MODBUS( PY602 Only)

(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(14)

Humidity

<= 80% RH

(15)

Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

96mm×48mm×100 mm (W x H x D)
96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

:92mmx46mm(WxH) 
: 92mm x 92mm (W x H)

(19)

Weight

400(Maximum) grams / 600 grams max.

 

Yes! I am interested

Sand Melt Pressure Indicator

REQUEST CALLBACK

Sand Melt Pressure Indicator
Approx. Rs 33,400 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
BrandSand
ModelPS1016
Display TypeDigital

Melt Pressure Display

  • Display pressure, temperature
  • Optional second input/output for cost-effective single instrument
  • View display information locally or remotely by optional Modbus RTU
  • Two alarm relay output, third alarm optional
  • Digital security code prevents unauthorized use
  • IP65/NEMA 4X rated for harsh environments 
Ideal For:
  • Synthetic Fibres
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion
  • Extrusion Melt Pressure Display
  • Melt pressure Display
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

Specifications

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.5mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(8)

Temperature Input

Thermocouple “E”, “J”, “K”

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

(11)

Communication

RS-485 MODBUS( PY602 Only)

(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(14)

Humidity

<= 80% RH

(15)

Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

96mm×48mm×100 mm (W x H x D)
96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

:92mmx46mm(WxH) 
: 92mm x 92mm (W x H)

(19)

Weight

400(Maximum) grams / 600 grams max.


Yes! I am interested

Sand Pressure Controller

REQUEST CALLBACK

Sand Pressure Controller
Approx. Rs 37,800 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
TypeAutomatic, Manual
Digit Display SizeDual Display

IDEAL FOR

  • Synthetic Fibres
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion

Extrusion Melt Pressure Controllers

  • Extrusion Melt Pressure Controllers
  • Melt pressure control
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

The Controllers are fully programmable melt pressure controller, suitable for precision pressure control in the plastic extrusion industries.

In its basic format the Controller standard hardware includes an input for melt pressure measurement, an analog output to drive the extruder screw and alarms to detect high and low pressure conditions. Additionally, a second pressure input can be connected providing the facility to put a differential pressure alarm across the screen. Automatic transducer calibration procedures and 5Vdc or 10Vdc transducer power supplies are provided for both inputs

Specifications

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.0mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(7)

Output Types

4-20 mA, 0-10 VDC, 0-5 VDC, 1-5 VDC

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

 



(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(15)

Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

92mm x 92mm (W x H)

(19)

Weight

400(Maximum) grams / 600 grams max.

Yes! I am interested

View PDF

PS 9016 Series Melt Pressure Controllers

REQUEST CALLBACK

PS 9016 Series Melt Pressure Controllers
Approx. Rs 37,800 / Piece
Get Best Quote
Product Details:
Minimum Order Quantity1 Piece
TypeAutomatic, Manual
Digit Display SizeDual Display

IDEAL FOR

  • Synthetic Fibres
  • Photographic film
  • Plastics - Solid extrusion
  • Wire coating
  • Multi-layer extrusion

 Extrusion Melt Pressure Controllers 

  • Extrusion Melt Pressure Controllers
  • Melt pressure control
  • Suitable for 4 or 6 wire transducers
  • Pre-screen pressure monitor and alarm
  • Pressure alarms
  • Simple calibration

The Controllers are fully programmable melt pressure controller, suitable for precision pressure control in the plastic extrusion industries.

In its basic format the Controller standard hardware includes an input for melt pressure measurement, an analog output to drive the extruder screw and alarms to detect high and low pressure conditions. Additionally, a second pressure input can be connected providing the facility to put a differential pressure alarm across the screen. Automatic transducer calibration procedures and 5Vdc or 10Vdc transducer power supplies are provided for both inputs

Specifications

(1)

Display

Dual 4-digit Green and Red LEDs

(2)

Resolution

0.2% FSO ± 1

(3)

LEDs

Out, Alarm-1, Alarm-2, Calibration

(4)

Input Sensibility

2.0mv/V or 3.3 mV/V (automatic selection)

(5)

Sampling Speed

20 per second

(6)

Excitation Voltage

10 VDC (output to transducer)

(7)

Output Types

4-20 mA, 0-10 VDC, 0-5 VDC, 1-5 VDC

(9)

All Output Relays

Relay 220V 1A

(10)

Retransmission

4~~20 mA standard current loop

 



(12)

Alarm Range

0001 – 9999 PSI or Bar (configurable)

(13)

Temperature

0 - 55°C

(15)

Calibration

80% FSO (Full Scale Output)

(16)

Power Supply

110/220VAC or +24VDC (designated while purchasing)

(17)

Size

96mm x 96mm x 100 mm (W x H x D)

(18)

Panel Cutout

92mm x 92mm (W x H)

(19)

Weight

400(Maximum) grams / 600 grams max.

Yes! I am interested

 
X


Call Us:  +91-8079452864
Dydac Controls
Sushil Zarabi (CEO)
No. B-1/6A, Mayur Vihar, Phase-III ,
New Delhi - 110096, Delhi, India
Contact via E-mail
Contact via SMS



Home  |   About Us   |  What We Offer  |  Site Map  |   Contact Us   |   Mobile Site

© Dydac Controls. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Dydac Controls