Send Email
Send SMS
Search
Dydac Controls
Dydac Controls


Temperature Sensors and Cables

Measuring temperature electrically

The measurement of temperature is important in many applications, such as, Plastic processing, Glass, building control, food processing and the manufacture of steel and petrochemicals. These very different applications require temperature sensors of different physical construction and often different technology.

In industrial and commercial applications the measurement point is frequently far away from the indication or control point. Often there is a requirement for further processing of the measurement in controllers, recorders or computers. Such applications are unsuitable for direct-indicating thermometers as we know them from every-day use but require devices which convert temperature into another form, an electrical signal. To provide this remote electrical signal it is common practice to employ RTD?s. thermistors and thermocouples.

RTD?s

The main metals in use are platinum and nickel. The most widely used sensor is the 100 ohm or 1000 ohm RTD or platinum resistance thermometer.

RTD?s are the most accurate sensors for industrial applications and also offer the best long-term stability. A representative value for the accuracy of a platinum resistance is +0.5 percent of the measured temperature. After one year there may be a shift of +0.05?C through aging. Platinum resistance thermometers can cover temperature ranges from -200 to 800?C.


Thermocouples are based on the effect that the junction between two different metals produces a voltage which increases with temperature. Compared with resistance thermometers they offer the clear advantage of a higher upper temperature limit, up to several thousand degrees Celsius. Their long-term stability is somewhat worse (a few degrees after one year), the measuring accuracy is slightly poorer (on the average +0.75% of the measurement range). They are frequently used in ovens, furnaces, flue gas measurements and other areas with temperatures above about 250?C.


Compensating Cables

REQUEST CALLBACK

Compensating Cables
Approx. Rs 80 / Meter
Get Best Quote
Product Details:
Minimum Order Quantity100 Meter
Length100 Meters

As an exceptional provider in the industry, we present a wide array of Insulated Compensating Cables to our customers. They are used for extending signal from a probe to instrumentation acting as controllers or recording devices. In such applications, multi pair thermocouple extension cables are preferred. An “X” designated extension wire after the ANSI thermocouple type like BX, EX, JX, KX, and SX, TX. We make it available for pocket friendly rates.

Specification

Type of wireTemperature RangeStandard Grade
TX(0oC to 200oC)±1.8 (1)
JX(0oC to 200oC)±4 (2.2)
EX(0oC to 200oC)±3.1 (1.7)
KX(0oC to 200oC)±4 (2.2)
NX(0oC to 200oC)±4 (2.2)
RX(0oC to 200oC)±9 (5
SX(0oC to 200oC)±9 (5
BX(0oC to 200oC)±6.7 (3.7)
    Yes! I am interested

    Heavy Duty Connectors

    REQUEST CALLBACK

    Heavy Duty Connectors
    Approx. Rs 7,000 / Piece
    Get Best Quote
    Product Details:
    Minimum Order Quantity1 Piece
    NO of Pins 5- 64 Pins
    Rating 10 , 16 and 35 amps
    ApplicationAutomotive
    Connector TypeFemale/Jack, Male/Plug

    Meeting the requirements of various industries, we offer Heavy Duty Connectors that have gained wide appreciation for optimum utility and consistent performance. Available in 5 pin, 6pin, 8pin, 16pin, 24pin, 32pin and 48 pin, these connectors can be customized as per the specific requirement of the client. These connectors are used for diverse industrial applications. We provide a wide range of heavy duty connectors for hot runner systems, cnc machines, plastic and packaging machines.

    Specifications:

    • Open bottom - top feeding - side feeding
    • Closed bottom - top feeding - side feeding
    Yes! I am interested

    Industrial Temperature Sensors

    REQUEST CALLBACK

    Industrial Temperature Sensors
    Approx. Rs 1,000 / Piece
    Get Best Quote
    Product Details:
    Minimum Order Quantity1 Piece
    Types J,K,R,S,T and RTD Sensors

    Our Company is engaged in manufacturing and trading Industrial Temperature Sensors. We can provide these sensors in different shapes and sizes as per the specification of the customers. These temperature sensors are also cost effective.

    Product Guide

    • Thermocouples
    • RTD
    • Temperature Calibration Equipment
    • High Temperature MI Cables
    • Non-Contact Pyrometers
    • Calibration Services

    Thermocouples

    • High Accurate Thermocouples for variety of applications

    Thermocouples With Thermowells/protection Tubes

    • Type : J, K, T, E, N
    • Element Size (MI) : 0.5, 1, 1.5, 3, 4.5, 6, 8 (mm),
    • Other Sizes on request
    • (Non-MI) : 1.2, 1.6, 2, 2.5, 3.2 (mm),
    • Protection Sheath : SS304, SS321, SS316, SS310
    • Configuration : Simplex/Duplex

    MI Thermocouples

    • Type : J, K,
    • Element Size (MI) : 1, 1.5, 3, 4.5, 6, 8, 10 (mm)
    • Other Sizes on request
    • Protection Sheath : SS321, SS316, SS310,INCONEL
    • Configuration : Simplex/Duplex

    Miniature Thermocouples

    • Type : J, K,
    • Element Size (MI) : 0.5, 1, 1.5, 3 (mm)
    • Protection Sheath : SS316, SS310

    Configuration : Simplex/Duplex/Multipoint, Swaged
    Resistance Temperature Detector

    High Accurate RTDs for General and Critical applications

      Yes! I am interested

      Temperature Sensors

      REQUEST CALLBACK

      Temperature Sensors
      Approx. Rs 1,000 / Piece
      Get Best Quote
      Product Details:
      Minimum Order Quantity1 Piece
      Types of Sensors J K,R,S, and RTD Sensor

      Thermocouples and RTDs are manufactured as standard sensors as per the detailed drawings. We have made the detailed drawings to make it easy for you to choose the correct type for your requirements. Standard sensors as per the drawings are manufactured in series and we can therefore supply these on short notice. Other types and versions to drawings and samples can be supplied.

      Thermocouple Thermocouples are fabricated by joining together two electrical conductors, each made of different metal alloys. This junction generates a small milli volt signal that changes with temperature. The signal is sent to an electronic device, which is used to display and/or control the temperature. The most common calibrations for thermocouples are types J, K.

      RTD Resistance temperature detectors (RTD’s) use the change in the electrical resistance of a wire wound device with a positive temperature coefficient to signal as a change in the temperature. While more expensive, RTDs offer more accurate linear readings than thermocouples. However they have longer response times, are not “tip sensitive”, and are more subject to damage from vibration. RTDs, Resistance Temperature Detectors, primarily utilize platinum (alternatively nickel or other materials). For applications less than 600 degrees Celsius, RTDs are utilized in as an external sensor to precisely control a heater
      Yes! I am interested

      Temperature Sensors

      REQUEST CALLBACK

      Temperature Sensors
      Approx. Rs 1,000 / Piece
      Get Best Quote
      Product Details:
      Minimum Order Quantity1 Piece
      Types J,K,R,S,T and RTD Sensors

      We are engaged in offering quality Temperature Sensors and Connectors that are designed for diverse industrial applications. Our range comprises Temperature Sensors, Heavy Duty Connectors, Thermocouple Connectors, Compensating Cables. Our range finds wide application in hot runner systems, CNC machines, thermocouple and plastic, packaging machines.

      Thermocouples

       

      • Thermocouples with Head
      • Thermocouple with Head and Tip Assembly
      • Thermocouple with Nipple
      • Thermocouple with Nipple Union Nipple
      • Thermocouple with Mineral Insulated Cables
      • Thermocouple with Cable and Fitting
      • Thermocouple with Bayonet and Cable
      • Thermocouple with Cable and Fitting(Spring Loaded)
      • Thermocouple with Weld Pad Cable
        Thermocouple with Cable Connectors
      • Thermocouple Probe with Cable Connectors
      • Thermocouple Exaust Gas.
      • Thermocouple with Connectors.
      • Thermocouple Inset

       

      RTD

      • Standard RTD with Head Fittng
      • Standard RTD with Head Tip Assembly
      • RTD with Head Weld Pad
      • RTD with Nipple
      • RTD with Nipple Union Nipple
      • RTD with Cable (Mineral Insulated)
        RTD with Cable and Adjustable Comp. Fitting
      • RTD with Cable Bayo Nut
      Yes! I am interested

      Theromocouple Connectors

      REQUEST CALLBACK

      Theromocouple Connectors
      Approx. Rs 560 / Piece
      Get Best Quote
      Product Details:
      Minimum Order Quantity1 Piece
      Types J, K and RTD

      We offer wide range of Theromocouple Connectors, which are widely known for their easy operations. these products are manufactured using high quality raw materials using sophisticated technologies. our products are used for various purposes such as cnc machines, runner systems, thermocouple, plastic as well as packaging machines. we offer these products in different specifications as well as dimensions to our clients.

      Features:


        • Withstand voltage fluctuations
        • Withstand high temperature
        • Sturdiness
        • Application Connector for thermocouple and RTD circuits.
        • Suited for small wires and mineral insulated cable.
        • Glass filled thermoplastic body with original thermocouple
        • Material pins and springloaded inserts
        • Polarized pins ensure proper connection.
        • Rugged one body design.
        • Wire size - Accepts wires up to 0,6 mm.
        • Maximum cable diameter 4,5 mm.
        • Temperature rating - 200 °C
        • Max. Color Code - Available in all color code standards.
          Yes! I am interested

          Thermocouple Connectors and RTD Connectors

          REQUEST CALLBACK

          Thermocouple Connectors and RTD Connectors
          Approx. Rs 560 / Piece
          Get Best Quote
          Product Details:
          Minimum Order Quantity1 Piece
          TYPES J , K and RTD

          We offer wide range of Thermocouple Connectors and RTD Connectors that are designed in line with international quality standards. Reckoned for their excellent withstanding capacity in high temperature, current or voltage fluctuations, these connectors are used for diverse industrial applications. We provide a wide range of thermocouple connectors for hot runner systems, cnc machines, thermocouple and plastic, packaging machines.

          Features:

          • Modern technology
          • High performance level
          • Easy to use
            Yes! I am interested

             
            X


            Call Us:  +91-8079452864
            Dydac Controls
            Sushil Zarabi (CEO)
            No. B-1/6A, Mayur Vihar, Phase-III ,
            New Delhi - 110096, Delhi, India
            Contact via E-mail
            Contact via SMS



            Home  |   About Us   |  What We Offer  |  Site Map  |   Contact Us   |   Mobile Site

            © Dydac Controls. All Rights Reserved (Terms of Use)
            Developed and Managed by IndiaMART InterMESH Limited

            Dydac Controls